K19 – RC Conversion Kit for Tamiya 1/35 JGSDF Type16 MCV, with MTC-2, ACU and GSU
Price: US$273
Status: Out of Stock
Features:
– Constructed by high precision metal parts
– Workable suspensions, metal damper parts and springs
– All wheel drive, 4 driving axles with universal joints, differential gear and metal gearbox
– steering servo
– GSU (gun stabilizer unit), with engine deck sensor. Gun rise automatically over engine deck position.
– 360 deg turret rotation, gun elevation and recoil servo
– Gun elevation servo
– Gun recoil servo
– Resin cast gun barrel with metal parts and precision muzzle brake
– Ultra bright LED for main gun and machine gun flashes
– 22KHz high quality digital recorded sound effects, including engine start, running and stop sounds, main gun and machine gun firing sounds
– Engine sounds changes according to speed
– Powered by 2 Cell 7.4V Lipo battery (Lipo battery NOT included and must be purchased separately)
Kit contains:
– MTC-2 mini tank controller with mounting plate
– ACU auxiliary control unit
– GSU gun stabilizer unit
– Driving axles assembly (x4)
– Gearbox (x4)
– Steering servo
– Washers W1, W2(x8), W3(x8)
– Damper parts M1(x8), M2(x4), M3(x4), M4(x4), M5(x4), front spring (x4), rear spring (x4)
– Turret assembly including gun elevation and recoil servos, and turret rotation motor
– Resin cast gun barrel with metal parts and precision muzzle brake
– Main gun flash LED
– Machine gun flash LED
– Turrer ring gear with speaker
– Lower hull drill mask plate
– 0.2mm saw blade, 0.6mm and 0.7mm drill bites
– 0.6mm copper wire
– 1mm PS plate
– Detail construction manual
Following items are required but NOT included. You must purchase them separately:
– TAMIYA 1/35 JGSDF Type16 MCV kit (ITEM 35361)
– RC transmitter and receiver (4CH or more recommended)
– 2 Cell 7.4V Lipo battery (550mAh) (Attention! Lipo battery can be dangerous if not use
properly. Follow all safety precautions and use a dedicate Lipo battery charger)
Manuals:
RC Conversion Kit for Tamiya 1/35 JGSDF Type16 MCV User Manual
MTC-2 and ACU User Manual
Attention:
This conversion kit is designed for experienced model maker which may be difficult for beginners. Please read the manual to see if you have the skill and tools required.